China MG-1A Aluminum Alloy with PTFE Tape Self-Lubricating Bearing Supplier, Manufacturer, Factory which can deliver not only high-performance products but also high-level services, such as material selection, simulation test, engineering design and installation.

MG-1A aluminijska legura sa samopodmazujućim ležajem od PTFE trake

Dom >> Katalozi >> Metalno-polimer kompozitni ležajevi >> MG-1A aluminijska legura sa samopodmazujućim ležajem od PTFE trake

Sadržaj

Napredno pretraživanje

Marginal Bearing mg-1a aluminijska legura sa ptfe trakom samopodmazujući ležaj specijalizirani proizvođač samopodmazujućih ležajeva i čahura, Marginal Bearing koji je osnovan 2010. godine, posvećen je razvoju i proizvodnji novih samopodmazujućih materijala za ležajeve.

Profil
Popis proizvoda
Značajka aplikacije

MG-1A aluminijska legura sa samopodmazujućim ležajem od PTFE trake

This material structure enables the final parts tube lighter and easier for installation. Suitable for dry running,low coefficient of friction, lower wear, good sliding characteristics,the transfer film created can protect the mating metal surface,suitable for rotary,linear and oscillating movement.

◆ Technical Data:

Technical Data
Max.load	Static	80 N/mm
	Very low speed	40N/mm
PV (dry running) Max.	Roatating oscillating	20N/mm
	Short-term operation	2.8N/mm2·m/s
	Continuous operation	1.8N/mm ·m/s
Temp. limit	-65℃~+260℃
Friction coenncient	0.05~0.20
Max. speed	Dry running	1m/s
	Hydrodynamic operation	>2m/s
Thermal conductivity	230 W(m·k)-1
Coenncient of thermal expansion	24×10 ·K